/ / Origami from modules: ideas, schemes for beginners

Origami from modules: ideas, schemes for beginners

Very impressive look the origami figures frommodules. If you have never tried to collect from separate elements bulk flowers or animals, then definitely try. Our article is intended for beginning masters. Here you will learn how to make origami from the modules according to the schemes, how to prepare the triangular corners themselves, how to connect them among themselves in different ways. Photos and step-by-step instructions will facilitate the task, so prepare two-sided thick paper, and start working together.

How to collapse a paper module

The origami of the modules is assembled separatelytwisted elements. These are small pointed corners with pockets for connecting parts together. How to fold them from a piece of paper, read on. In step-by-step photography, the sequence of actions is clear.

how to make modules for origami

A sheet of paper in A-4 format bends in halfseveral times so that small rectangles are formed. There should be 16 parts. They are cut along the folds of paper, and work is performed on each element according to the scheme. Origami from the modules always begins with the manufacture of a large number of small parts. If you plan to make even a small figure, then prepare at least 300 modules. Then, if not enough, you can easily turn them off. It is better to prepare the modules in advance in order to deal with fresh forces only by creating a character's figure.

How to make a long connection

Origami from the modules for beginnersstart with the training exercises. There are two types of connections. First, you need to learn how to make a long and thin strip, from which you can create a neck for animals or birds, hands for people or fairy-tale characters, make circles, connecting the last module with the first one. Secondly, it is necessary to understand the principle of joining parts in height and width to create voluminous compositions. Consider in the photo below how to achieve this.

how to connect details

If you look at the module, you will understand that withOn one side, he has sharp corners, and on the opposite side - two pockets. To connect the parts into a long strip, the two corners must be inserted into the two pockets on the back of the module. Next insert the same way until you have created the required length. If you need a smooth part, then the models are simply connected one after another. If you want to create a bend, for example, the neck of a swan, or a semicircle, then the necessary shape for the character is attached. If you need a full circle, then the first and last parts are connected together. Act carefully and modules to connect tightly, so they do not fly out.

How parts are joined in width

Explaining how to collect origami from modules for beginners, it is necessary to show another kind of connection of elements among themselves. Consider the manufacture of a simple fish figurine.

fish from origami modules

After manufacturing of multi-colored details workbegins with two blue. In this origami of modules, the joining of parts takes place differently. The corners of the first module are inserted not in the two pockets of the next, but in the following way:

  • the right corner is inserted into the left pocket of one module;
  • the left corner must be tightly inserted into the pocket of the other module on the right side.

The result is a triangular bond.Two modules come out of one module. Let's return to making our fish figurine. Its nose consists of two modules, which are connected in a different way to create a steep transition to a wider part. The top module is inserted into the right pocket of the second row part in the right-hand corner, and the right-hand corner is inserted into the left pocket of the element next to it. The other corner of the first row is inserted similarly. It turns out at once a large expansion of the series, that is, from the two modules at first comes not 3 standard, but 4 elements at once. Further work is conducted according to the usual method before creating the necessary figure size.

The tail and fins are formed in different ways.The sharp fins are made according to the first described scheme, that is, they are joined in a strip of modules of different colors. The tail is executed in a second way, that is, an extension from one module to five.

Stand for pens

Following the step-by-step instructions aboveorigami from the modules, you can collect the following figure. It is a round barrel whose walls are made up of small elements of different colors. To make beautiful spirals, the first lower row is made up of alternate arrangement of flowers. Place the modules at right angles to the table surface.

Stand for pens

Bottom hole after work is finishedit is sealed with a circle cut from a thick cardboard. Such origami from the modules looks spectacular. And it is a practical subject that will not only decorate the student's desk, the stand will be used daily.

Flowers origami from modules

Tsvetik-semitsvetik from favorite children's fairy taleValentina Kataeva is going out of the box. The assembling of elements in the craft with the yellow center begins. Seven modules are located in the middle of the pockets and at right angles to the table surface. Then there is a sharp expansion. To do this, two elements are inserted into each module in the standard series in the next row. The difference from the usual scheme is that there is also a third module between them, which is simply inserted in the middle between the corners. The third row of origami colors from the modules is already performed according to the usual scheme, that is, of the 3 modules, 4 are obtained.

flower from modules

You also need to monitor the spiral locationcolors. When the necessary volume of the circle is reached, work on individual petals begins. There is no longer an extension of the figure, but a reduction in the number of parts. Origami colors from the modules must end with one element on each of the seven petals. At the end, the figure curves upwards with a neat movement. Acting should be done gently, slowly, so as not to disorganise the structure.

A swan figurine

Creation of such origami from modules occurstwo ways. The neck is assembled as the first variant of connecting the parts, that is, each next module is inserted into the two pockets of the previous one. The trunk is assembled according to the second method described above, that is, the corners of the modules of the first row are inserted into the pockets of the two modules of the second.

swan from origami modules

Circular assembly is carried out to the required level. Then it is necessary to work separately above the expansion in several rows for attaching the neck and wide raising of the tail part. At the rear, each row is reduced from two sides to one module, until only one part remains in the center of the tail. On the head, the last element is a module of red or orange colors. This is the beak of a bird.

Conclusion

Description origami of the modules, given in the article,will help to perform simple crafts for novice masters without much effort. The work on making modular figures is laborious and laborious, but crafts are very effective, they can decorate any voluminous work for an exhibition in school, decorate the interior of a room or office.

comments